← 返回
功率器件技术 功率模块 可靠性分析 ★ 2.0

基于低温共烧陶瓷的平面触发开关及其集成爆炸箔起爆器芯片

Planar Trigger Switch and Its Integrated Chip With Exploding Foil Initiator Based on Low-Temperature Cofired Ceramic

作者 Qiu Zhang · Cong Xu · Peng Zhu · Guili Yang · Zhi Yang · Ruiqi Shen
期刊 IEEE Transactions on Power Electronics
出版日期 2020年3月
技术分类 功率器件技术
技术标签 功率模块 可靠性分析
相关度评分 ★★ 2.0 / 5.0
关键词 平面触发开关 低温共烧陶瓷 LTCC 爆炸箔起爆器 电感 自击穿电压
语言:

中文摘要

本文设计并制造了一种基于低温共烧陶瓷(LTCC)的三电极平面触发开关,并在大气压下进行了特性测试。结果表明,当工作电压处于自击穿电压的77.2%至86.8%之间时,该开关的电感比商用火花隙开关降低了约60 nH,且具备良好的触发性能。

English Abstract

A planar trigger switch constituting of three electrodes was designed and fabricated using low-temperature cofired ceramic, and characterized under an atmospheric pressure. The results showed that when the operating voltage ranges between 77.2% and 86.8% of its self-breakdown voltage, the inductance of the switch was lower than that of commercial spark gap switch by approximately 60 nH, the curren...
S

SunView 深度解读

该研究涉及高压脉冲功率开关技术,主要应用于特种电源或高能物理领域,与阳光电源现有的光伏逆变器、储能PCS及充电桩等主流电力电子产品在应用场景上存在较大差异。虽然LTCC工艺在功率模块集成与小型化方面具有参考价值,但该开关技术目前难以直接应用于阳光电源的商业化产品线。建议关注其在极端工况下的高压绝缘与低电感设计思路,作为未来超高压电力电子器件封装或特殊保护电路设计的技术储备。