← 返回
短路条件下串联IGBT的电压平衡
Voltage Balancing of Series IGBTs in Short-Circuit Conditions
| 作者 | Mostafa Zarghani · Saeed Peyghami · Francesco Iannuzzo · Frede Blaabjerg · Shahriyar Kaboli |
| 期刊 | IEEE Transactions on Power Electronics |
| 出版日期 | 2022年5月 |
| 技术分类 | 功率器件技术 |
| 技术标签 | IGBT 功率模块 可靠性分析 |
| 相关度评分 | ★★★★ 4.0 / 5.0 |
| 关键词 | 串联IGBT 电压均衡 短路工况 有源驱动 钳位型缓冲电路 电力电子 IGBT可靠性 |
语言:
中文摘要
本文提出了一种串联IGBT电压平衡方案,在短路条件下表现优异。通过引入优化的钳位型缓冲电路及有源驱动器,在短路期间平衡各IGBT电流,从而显著降低缓冲电容需求,提升了高压功率变换系统的可靠性。
English Abstract
This article proposes a scheme for balancing the voltage of series-connected insulated gate bipolar transistors (IGBTs), which is also very effective under short-circuit conditions. An optimized clamp-mode snubber is proposed, including an active-driver to balance the currents of the IGBTs during short-circuit, which in turn allows for a considerable reduction of the snubber capacitance. The appro...
S
SunView 深度解读
该技术对于阳光电源的高压大功率产品线具有重要应用价值。在集中式光伏逆变器及PowerTitan系列大型储能PCS中,为了满足高直流母线电压需求,常采用IGBT串联技术。该方案提出的有源驱动与优化缓冲电路,能有效解决短路工况下的电压不平衡问题,不仅能提升系统在高压下的可靠性,还能通过减小缓冲电容体积,进一步优化功率密度。建议研发团队评估该方案在兆瓦级PCS功率模块中的集成可行性,以提升产品在极端工况下的鲁棒性。