基于喷射点胶的电力电子模块电场自适应可控结构组装

In power modules, partial discharge (PD) at the triple points of “Copper-Ceramic-Silicone Gel” poses a significant challenge to the development of higher voltage and power density. This article utilized a reliable and controllable method, jet dispensing, to assemble the electric field adaptively controlled structure in power electronic modules to optimize the electric field distribution. The structure was composed of ZnO/epoxy resin nonlinear conductivity composites, with the thickness controlled at 300~ ~50~ m. The assembled electric field adaptively controlled structure significantly enhanced the PD inception voltage (PDIV) of the module from 6.0 to 13.2 kV, with a 120.0% increase under the sinusoidal waves, and from 4.0 to 9.6 kV under positive polarity square-wave pulses, with an increased ratio of 140.0%. This article provides a new perspective on the application of nonlinear materials in power electronic modules.