← 返回
| 作者 | Tsuyoshi Inaba · Hirotaka Koizumi |
| 期刊 | IEEE Transactions on Power Electronics |
| 出版日期 | 2018年2月 |
| 技术分类 | 拓扑与电路 |
| 技术标签 | 宽禁带半导体 功率模块 |
| 相关度评分 | ★★★ 3.0 / 5.0 |
| 关键词 | E/F3类 功率振荡器 零电压开关 ZVDS 高频 开关损耗 谐波调谐 |
语言:
中文摘要
本文提出了一种基于E/F3类放大器的E/F3类调谐功率振荡器。该振荡器包含反馈回路电路,可实现自动起振。此外,通过引入三次谐波调谐,该振荡器实现了零电压开关(ZVS)和零电压导数开关(ZVDS),从而在高频工作下显著降低了开关损耗。
English Abstract
This paper proposes a Class E/F3 tuned power oscillator based on the Class E/F3 amplifier. The oscillator has a feedback-loop circuit and starts the oscillation in automatic. In addition, the oscillator achieves zero-voltage switching and zero-voltage derivative switching; therefore, the switching losses are reduced under high oscillation frequency. Moreover, the third harmonic tuned by providing ...
S
SunView 深度解读
该研究聚焦于高频功率变换拓扑,通过谐波调谐实现ZVS/ZVDS,对提升功率密度具有参考价值。对于阳光电源而言,该技术可探索应用于下一代高频化、小型化的户用光伏逆变器或微型逆变器产品线,以进一步缩小体积并提升效率。虽然目前阳光电源主流产品(如PowerTitan、组串式逆变器)多采用成熟的软开关拓扑,但该振荡器技术在辅助电源设计或高频功率模块驱动电路中具有潜在的应用前景,有助于优化系统整体的功率密度与热管理水平。