← 返回
电动汽车驱动
★ 4.0
基于栅极偏压调控MoSe2场效应晶体管中TCR的高灵敏度热传感器设计
Highly Sensitive Thermal Sensor Design Using a Gate-Bias-Controlled TCR in MoSe2 FET
| 作者 | Shubham Saxena · Sumit Sharma · Biswajit Khan · Nitish Kumar · Samaresh Das · V. Ramgopal Rao |
| 期刊 | IEEE Transactions on Electron Devices |
| 出版日期 | 2025年5月 |
| 技术分类 | 电动汽车驱动 |
| 相关度评分 | ★★★★ 4.0 / 5.0 |
| 关键词 | 电阻温度系数 二硒化钼 可调性 栅极偏压控制 热传感器 |
语言:
中文摘要
电阻温度系数(TCR)是热传感器设计中的关键参数。本文研究了通过栅极电压调控层状半导体材料二硒化钼(MoSe2)的TCR可调性。利用原子力显微镜和拉曼光谱表征MoSe2薄片,其TCR值约为MoS2的两倍、金属薄膜的五倍(通常为0.5% K⁻¹)。在7 V栅压范围内,15 nm厚样品的TCR可提升至2.75% K⁻¹,调谐范围达两倍;65 nm样品的调谐范围更达4.5倍。器件TCR平均相对不确定度分别为3.8%(65 nm)和4.6%(15 nm),展现出优异的热敏性能。
English Abstract
Temperature coefficient of resistance (TCR) is an important property for the design of thermal sensors. It is calculated as per the relative shift in electrical resistance for every degree of thermal variation. Furthermore, tunable TCR implies controlling the TCR through the manipulation of gate voltage. In this article, we have investigated the TCR tunability of the layered semiconductor material molybdenum diselenide (MoSe2) with gate-bias control. Atomic force microscope (AFM) is used to measure flake height, and Raman spectroscopy is used to characterize the MoSe2 flakes. Their TCR is higher by about two times that of MoS2 and five times that of metallic films, which are typically around 0.5% K ^-1 . Its TCR can be tuned to about two times higher than its value for 15-nm-thick flake within a gate voltage change of 7 V, with the highest recorded value being −2.75% K ^-1 . Similarly, 65-nm-thick flake has a TCR tunability of 4.5 times higher than the minimum value. Additionally, the average relative uncertainty in TCR is observed to be 3.8% for the 65-nm devices and 4.6% for the 15-nm devices, respectively.
S
SunView 深度解读
该MoSe2场效应晶体管热传感技术对阳光电源功率电子产品具有重要应用价值。其2.75% K⁻¹的高TCR灵敏度和栅压可调特性,可应用于:1)SiC/GaN功率模块的精密温度监测,实现芯片级热管理优化;2)ST储能变流器和SG光伏逆变器的IGBT/MOSFET结温实时监控,提升过载保护精度;3)电动汽车OBC和电机驱动系统的多点温度传感阵列,增强热失控预警能力。相比传统NTC热敏电阻,该技术灵敏度提升5倍且可通过栅压动态调节响应范围,为iSolarCloud平台的预测性维护算法提供高精度温度数据支撑,延长功率器件寿命并提升系统可靠性。