考虑纹波功率传输的基于模块化多电平变换器的电力电子变压器设计与优化

The modular multilevel converter (MMC)-based power electronic transformer (PET) offers the advantage of enabling ripple power transfer (RPT) through inherent dual active bridges (DABs), thereby reducing the required submodule capacitance and enhancing power density. However, the implementation of RPT leads to increased loss and volume of DABs, posing challenges to the operation mode selection and parameter design. In this article, the design and optimization of the MMC-based PET when it operates in the RPT mode are comprehensively investigated for the first time through multiobjective optimization (MOO). First, suitable models are established to estimate component losses and volumes of the MMC-based PET. Utilizing these models, an MOO program considering both efficiency and power density is developed to explore the design principles of the PET. Notably, this article also proposes a design technique based on partial RPT and verifies its benefits in the PET design. The research done in this article seeks to provide guidance for the optimal operation mode selection and parameter design of the MMC-based PET. A design example of a full-scale 30 kW/1 kV PET submodule, together with a scaled-down but complete PET prototype, validates the effectiveness of the proposed analysis and design methods.