← 返回
基于纹波电压补偿法的具有部分功率变换特性的高峰均比脉冲功率抑制
Ripple Voltage Compensation Method-Based High Peak-to-Average-Ratio Pulsed Power Suppression With Partial Power Conversion Characteristics
| 作者 | Zuoqian Zhang · Hongfei Wu · Haitao Yu · Linwei Xie · Yan Xing |
| 期刊 | IEEE Transactions on Power Electronics |
| 出版日期 | 2024年8月 |
| 技术分类 | 拓扑与电路 |
| 技术标签 | 储能变流器PCS 双向DC-DC 功率模块 储能系统 |
| 相关度评分 | ★★★★ 4.0 / 5.0 |
| 关键词 | 脉冲功率抑制 纹波电压补偿 部分功率变换 DC-DC 变换器 储能 功率波动 直流母线 |
语言:
中文摘要
本文提出了一种插入直流母线与储能电容之间的脉冲功率抑制电路,旨在平衡输入输出功率,维持系统输入端的恒定功率。该电路利用部分功率变换特性,有效抑制低频脉冲负载引起的功率波动,提升了电力系统的稳定性。
English Abstract
The periodic power fluctuation of low-frequency pulsed power load leads to disturbance to the power supply system. Pulsed power suppression circuit is necessary to balance the input and output power, and maintain an unpulsed input power of the power system. In this article, a pulsed power suppression circuit, which is inserted between the input dc bus and the energy storage capacitors, is proposed...
S
SunView 深度解读
该技术对于阳光电源的储能系统(如PowerTitan、PowerStack)及PCS产品具有重要参考价值。在处理高动态响应或脉冲负载(如工业微网、充电站)应用场景时,该抑制电路能有效平抑直流侧波动,降低对储能电池组的冲击,延长电池寿命。建议研发团队评估该“部分功率变换”拓扑在提升PCS功率密度和转换效率方面的潜力,特别是在优化直流侧电容配置、降低系统体积与成本方面,可作为下一代储能变流器控制策略的优化方向。