← 返回
一种采用连续电流模式的升压型双向串联谐振DC/DC变换器
A Step-Up Bidirectional Series Resonant DC/DC Converter Using a Continuous Current Mode
| 作者 | Federico Martin Ibanez · Jose Martin Echeverria · Javier Vadillo · Luis Fontan |
| 期刊 | IEEE Transactions on Power Electronics |
| 出版日期 | 2015年3月 |
| 技术分类 | 拓扑与电路 |
| 技术标签 | 双向DC-DC 储能变流器PCS 储能系统 功率模块 |
| 相关度评分 | ★★★★★ 5.0 / 5.0 |
| 关键词 | 双向 DC-DC 变换器 串联谐振变换器 升压 降压 储能 连续电流模式 |
语言:
中文摘要
本文提出了一种新型技术,使传统的串联谐振DC/DC变换器(SRC)能够实现升压和降压功能。该技术特别适用于双向DC/DC变换器应用场景,其中一端连接固定直流母线(如360V直流线),另一端连接储能设备(如超级电容器组或电池组)。
English Abstract
This paper presents the analysis and design of a novel technique that allows the conventional series resonant dc/dc converter (SRC) to work as a step-up and step-down converter. This is useful in bidirectional dc/dc converters where one port is attached to a fixed voltage dc line, e.g., a 360-V dc line, and the other port is attached to an energy storage device such as a bank of supercapacitors or...
S
SunView 深度解读
该技术对阳光电源的储能业务(如PowerTitan、PowerStack及ST系列PCS)具有重要参考价值。储能系统在连接电池组与直流母线时,对双向DC/DC变换器的效率和功率密度要求极高。该研究提出的连续电流模式SRC拓扑,能够优化变换器在宽电压范围下的升降压性能,有助于提升PCS产品的转换效率,减少谐振损耗。建议研发团队评估该拓扑在提升储能系统充放电效率及降低磁性元件体积方面的潜力,特别是在针对超级电容或高压电池组的混合储能应用中,可作为下一代高功率密度PCS设计的技术储备。