← 返回
一种由压电换能器辅助实现10mV冷启动且峰值效率达82.7%的热电能量采集系统
A Thermoelectric Energy Harvesting System Assisted by a Piezoelectric Transducer Achieving 10-mV Cold-Startup and 82.7% Peak Efficiency
| 作者 | Tianqi Lu · Ruizhi Wang · Zhong Tang · Yiwei Zou · Xinling Yue · Yansong Liang · Haoran Gong · Shurui Liu · Zhiyuan Chen · Xun Liu · Junmin Jiang · Bo Zhao · Sijun Du |
| 期刊 | IEEE Transactions on Power Electronics |
| 出版日期 | 2024年5月 |
| 技术分类 | 拓扑与电路 |
| 技术标签 | DC-DC变换器 功率模块 |
| 相关度评分 | ★★ 2.0 / 5.0 |
| 关键词 | 热电能量收集 压电换能器 冷启动 低电压 电源管理 能量转换 阻抗匹配 |
语言:
中文摘要
本文提出了一种10mV启动电压的热电能量采集系统,利用压电发电机(PEG)作为冷启动辅助。该方案针对同时存在热能与动能的环境,通过PEG提供时钟信号实现系统启动。得益于PEG的高输出阻抗特性,该系统在极低电压下展现了优异的启动性能与转换效率。
English Abstract
This article presents a 10 mV-startup-voltage thermoelectric energy harvesting system, assisted by a piezoelectric generator (PEG) as a cold starter. It exploits the fact that when a thermoelectric energy harvesting system is implemented in a place where kinetic energy is also present, the PEG starter can provide a clock signal to start the system. Thanks to the high output impedance of the PEG, t...
S
SunView 深度解读
该技术主要涉及微功率能量采集与超低电压启动电路,与阳光电源现有的兆瓦级光伏逆变器及大容量储能系统(如PowerTitan)在功率等级上差异巨大。然而,其“冷启动”与“低电压启动”的设计理念对阳光电源的iSolarCloud智能运维平台中的无线传感器节点、分布式监测终端或储能系统的BMS辅助电源设计具有一定的参考价值。建议关注该技术在提升系统自供电能力及极端工况下黑启动控制逻辑方面的微型化应用潜力。