← 返回
即插即用直流微电网中串联输出电池模块的电压均衡
Voltage Sharing With Series Output Connected Battery Modules in a Plug-and-Play DC Microgrid
| 作者 | Mohamed Kamel · Regan Andrew Zane · Dragan Maksimovic |
| 期刊 | IEEE Transactions on Power Electronics |
| 出版日期 | 2021年11月 |
| 技术分类 | 储能系统技术 |
| 技术标签 | 储能系统 储能变流器PCS 电池管理系统BMS 微电网 |
| 相关度评分 | ★★★★★ 5.0 / 5.0 |
| 关键词 | 直流微电网 电池功率模块 电压均流 荷电状态 (SOC) 调节 即插即用 电池管理系统 |
语言:
中文摘要
本文提出了一种在宽总线电压范围内,针对即插即用直流微电网中串联输出电池功率模块(BPM)的电压均衡方案。系统通过串联输出的BPM实现主动电池均衡并与总线连接。利用电池电流传感器,同时实现了荷电状态(SOC)调节与输出电压均衡。
English Abstract
This article presents output voltage sharing among series output connected battery power modules (BPMs) in plug-and-play (PnP) dc microgrids with a wide bus voltage range. The system provides active cell balancing and interfaces cells to the bus voltage through series output connected BPMs. A cell current sensor is utilized to achieve both state-of-charge regulation and output voltage sharing. To ...
S
SunView 深度解读
该技术对阳光电源的储能业务(如PowerTitan、PowerStack系列)具有重要参考价值。随着储能系统向高压化、模块化发展,串联电池模块的电压均衡与SOC管理是提升系统效率与寿命的关键。文中提出的即插即用(PnP)架构与主动均衡控制策略,可优化阳光电源大容量储能系统的拓扑设计,提升系统在复杂微电网环境下的灵活性与可靠性。建议研发团队关注该控制算法在BMS与PCS协同控制中的应用,以进一步提升系统在宽电压范围下的运行性能。