← 返回
拓扑与电路 DC-DC变换器 功率模块 ★ 3.0

具有高降压比和简单控制的串联电流源型多路输出变换器

Series-Connected Current-Source-Mode Multiple-Output Converters With High Step-Down Ratio and Simple Control

作者 Xiaolu Lucia Li · Zheng Dong · Chi K. Tse
期刊 IEEE Transactions on Power Electronics
出版日期 2019年10月
技术分类 拓扑与电路
技术标签 DC-DC变换器 功率模块
相关度评分 ★★★ 3.0 / 5.0
关键词 多路输出变换器 降压比 电流源模式 无变压器 功率变换 电压应力 控制简化
语言:

中文摘要

本文提出了一种适用于高降压比应用的两级无变压器多路输出变换器。该电路通过电流接口和电流源模式(CSM)变换器传输功率,实现了低电压应力并大幅简化了控制策略。第一级电路通过调节提供恒定电流,从而优化了整体系统的效率与控制复杂度。

English Abstract

In this paper, a two-stage transformerless multiple-output converter is proposed for applications requiring a high voltage step-down ratio. The proposed circuit transfers power via a current interface and the use of current-source-mode (CSM) converters, resulting in low voltage stress and drastically simplified control. The first stage of this configuration is regulated to provide a constant curre...
S

SunView 深度解读

该拓扑结构在高降压比应用中的优势,对阳光电源的户用光伏逆变器及储能系统(如PowerStack)中的辅助电源设计具有参考价值。通过电流源模式简化控制,有助于降低辅助电源模块的复杂度和电压应力,提升系统可靠性。建议研发团队关注该拓扑在多路直流输出场景下的效率表现,评估其是否能替代现有辅助电源方案,以进一步减小体积并提升功率密度,特别是在需要多电压等级供电的储能PCS控制板设计中。