← 返回
能量收集压电驱动CMOS串联开关电感桥
Energy-Harvesting Piezoelectric-Powered CMOS Series Switched-Inductor Bridge
| 作者 | Siyu Yang · Gabriel A. Rincon-Mora |
| 期刊 | IEEE Transactions on Power Electronics |
| 出版日期 | 2019年7月 |
| 技术分类 | 拓扑与电路 |
| 技术标签 | DC-DC变换器 MPPT |
| 相关度评分 | ★★ 2.0 / 5.0 |
| 关键词 | 能量收集 压电换能器 CMOS 串联开关电感桥 MPPT 微系统 功率效率 |
语言:
中文摘要
微型压电换能器可将少量环境能量转化为电能,但功率损耗和击穿电压限制了其应用。本文提出了一种压电能量收集器,无需额外的最大功率点跟踪(MPPT)级即可在最大功率点运行,从而降低了系统损耗并提升了微系统的能量利用效率。
English Abstract
Tiny piezoelectric transducers transform a very small fraction of ambient energy into electrical power. Power losses and breakdown voltages unfortunately limit how much of this power reaches the microsystem. The piezoelectric harvester presented here operates at the maximum power point (MPP) without the separate MPP stage that typical piezoelectric harvesters need. As a result, the system loses le...
S
SunView 深度解读
该研究聚焦于微功率能量收集与无额外MPPT级的电路拓扑优化,主要应用于微型传感器或低功耗物联网设备。对于阳光电源而言,该技术与当前大功率光伏逆变器及储能系统(如PowerTitan、PowerStack)的功率等级差距较大。但在iSolarCloud智能运维平台的传感器节点供电、以及未来分布式能源微型化监测设备的自供电设计中,该类高效率、低损耗的电路拓扑具有一定的参考价值,可作为提升运维终端设备续航能力的技术储备。