← 返回
一种具有双工作模式的负输出高二次变换比DC-DC变换器
A Negative-Output High Quadratic Conversion Ratio DC–DC Converter With Dual Working Modes
| 作者 | Jing Li · Jinjun Liu |
| 期刊 | IEEE Transactions on Power Electronics |
| 出版日期 | 2019年6月 |
| 技术分类 | 拓扑与电路 |
| 技术标签 | DC-DC变换器 功率模块 |
| 相关度评分 | ★★★ 3.0 / 5.0 |
| 关键词 | DC-DC 变换器 二次变换比 升压模式 降压模式 稳态分析 小信号建模 电力电子 |
语言:
中文摘要
本文提出了一种具有双工作模式的负输出高二次变换比DC-DC变换器,分别对应升压模式和升降压模式。文章详细分析了电路原理、不同工作模式、稳态计算及小信号建模,并通过与其他变换器的对比验证了所提拓扑的性能优势。
English Abstract
A negative-output high quadratic conversion ratio dc-dc converter with dual working modes is proposed. One working mode is a step-up mode, and the other is a step-up/step-down mode. Analysis of the circuit principle and different operation modes, steady-state calculation, and small-signal modeling are presented. Comparisons of the proposed converter with other converters demonstrate that the propo...
S
SunView 深度解读
该拓扑结构通过二次变换实现高增益,适用于对电压变换比要求较高的特定电源转换场景。对于阳光电源而言,该技术可作为研发储备,重点关注其在户用光伏优化器或特定储能PCS辅助电源中的应用潜力。虽然目前阳光电源主流产品(如PowerTitan、组串式逆变器)多采用成熟的LLC或双向DC-DC拓扑,但该研究提出的双模式控制策略在提升系统灵活性和宽电压范围适应性方面具有参考价值,建议评估其在高效率与功率密度方面的实际表现,以优化下一代小型化电力电子模块的设计。