← 返回
控制与算法 PWM控制 充电桩 ★ 3.0

基于新型高频电压注入法的表贴式永磁同步电机初始转子位置检测方法

Initial Rotor Position Detection Method of SPMSM Based on New High Frequency Voltage Injection Method

作者 Bangcheng Han · Yangyang Shi · Xinda Song · Kun Hong · Kun Mao
期刊 IEEE Transactions on Power Electronics
出版日期 2019年4月
技术分类 控制与算法
技术标签 PWM控制 充电桩
相关度评分 ★★★ 3.0 / 5.0
关键词 SPMSM 无传感器控制 初始位置检测 高频电压注入 虚拟高频旋转坐标系 载波频率分量
语言:

中文摘要

本文提出了一种针对表贴式永磁同步电机(SPMSM)的无传感器控制初始位置检测新策略。该方案结合了虚拟高频(HF)脉振电压注入法与载波频率分量法,通过引入基于传统高频法的虚拟高频旋转坐标系,有效提升了无传感器控制的性能。

English Abstract

A novel initial position detecting strategy of sensorless control for the surface-mounted permanent magnet synchronous motor is proposed, the scheme combines the virtual high frequency (HF) voltage pulsating injection method with the carrier frequency component method. In order to improve the sensorless control performance, this method adds the virtual HF rotation frame based on the traditional HF...
S

SunView 深度解读

该技术主要涉及电机驱动控制算法,与阳光电源的电动汽车充电桩业务具有较强的技术关联性。在充电桩内部的功率转换模块及未来可能涉及的电机驱动应用场景中,无传感器控制技术能有效降低硬件成本并提升系统可靠性。建议研发团队关注该高频注入算法在低速及零速状态下的鲁棒性表现,评估其在充电桩辅助冷却系统电机或未来车载充电系统中的应用潜力,以优化系统启动性能和动态响应。