← 返回
一种用于电力电缆离线局部放电检测的新型阻尼交流发电机
A Novel Damped AC Generator Used for Off-Line Partial Discharge Testing of Power Cables
| 作者 | Jia Peng · Ruisong Zhang · Shurong Li · Daning Zhang · Junbo Deng |
| 期刊 | IEEE Transactions on Power Delivery |
| 出版日期 | 2025年5月 |
| 技术分类 | 储能系统技术 |
| 技术标签 | 储能系统 |
| 相关度评分 | ★★★★★ 5.0 / 5.0 |
| 关键词 | 阻尼交流测试 局部放电 阻尼交流发生器拓扑 空间电荷 实验平台 |
语言:
中文摘要
阻尼交流(DAC)测试广泛用于电力电缆局部放电(PD)检测,但传统方法在直流充电过程中易产生空间电荷累积,损害电缆绝缘。为此,本文提出一种新型DAC发电机拓扑结构,在原有基础上增加储能电容和开关器件。通过在不同时刻控制开关动作,使电缆电压从接近零开始振荡,避免了高直流电压起始导致的空间电荷注入。实验平台验证结果表明,该发电机运行正常,可有效激发电缆缺陷处的局部放电信号。对比实验显示,针对两类缺陷,新型DAC电压下的总放电量低于传统方式,证明其有效抑制了空间电荷注入。
English Abstract
Damped AC (DAC) testing is a widely utilized method for detecting partial discharge (PD) signals in power cables. However, the conventional approach is detrimental to the cable's insulation due to the accumulation of space charge during the DC charging process. To address this issue, this paper proposes a novel DAC generator topology. Compared with the conventional DAC generator, a storage capacitor and a switch are added. In the proposed DAC generator, by conducting switches at different moments, the voltage across the cable oscillates from near zero instead of starting from a high DC voltage, thus preventing the injection of space charge into the cable's insulation layer. To verify the effectiveness of the proposed DAC generator, an experimental platform was established. The results demonstrate that the DAC generator operates normally and successfully initiates PD signals at cable defect sites. The comparative experiments reveal that the total PD quantity under the novel DAC voltage is lower than that under the conventional DAC voltage for two types of defects, which suggests no space charge is injected in the novel DAC approach.
S
SunView 深度解读
该新型阻尼交流发电机技术对阳光电源储能系统和电网侧设备的电缆检测维护具有重要应用价值。在PowerTitan大型储能系统和ST系列储能变流器中,高压电力电缆是关键连接部件,其绝缘状态直接影响系统安全。传统局放检测方法的空间电荷累积问题可能加速电缆老化,而该技术通过储能电容与开关器件的协同控制,实现从零电压起振的DAC波形,有效抑制空间电荷注入。这为阳光电源智能运维平台iSolarCloud的预测性维护功能提供了更安全的离线检测方案,可应用于储能电站、光伏电站及充电站的高压电缆定期检测,延长电缆寿命,降低运维风险,提升系统可靠性。