← 返回
光伏发电技术 空间矢量调制SVPWM 三电平 ★ 5.0

虚拟矢量调制与电容电压控制实现全滞后无功功率流动能力的耦合八开关三相三电平逆变器

Virtual Vector Modulation and Capacitor Voltage Control for Coupled Eight-Switch Three-Phase Three-Level Inverter With Full Lagging Reactive Power Flow Capability

语言:

中文摘要

针对光伏应用对低成本的需求,已提出八开关三相三电平逆变器及其调制策略,但该策略仅适用于高功率因数工况。本文分析了该拓扑下各电压矢量的无功功率流通能力,提出一种新型虚拟空间矢量调制方法,在每个扇区内定义一个虚拟小矢量,并选用可在全滞后功率因数范围内工作的矢量,从而实现完整的滞后无功调节能力。同时提出一种主动中点电压控制策略,仅需计算一个系数,计算简便,并综合考虑虚拟小矢量引入的中点电压波动与中点电流,可提供正、负及零中点电流,实现全功率因数和调制比下的精确中点电位平衡控制,且无明显直流偏移与交流纹波。实验基于3 kVA样机验证了所提调制与控制策略的有效性。

English Abstract

Due to the requirement of low cost in photovoltaic (PV) applications, an eight-switch three-phase three-level inverter (TP-TLI) and its modulation strategy have been proposed. However, it can only operate under high power factor (PF) conditions with this modulation strategy. In this article, the reactive power flow capability of each voltage vector is analyzed for the eight-switch TP-TLI. Based on this, a novel virtual space vector modulation (VSVM) is proposed. In each sector, it defines one virtual small vector and uses the vectors which are viable for full operation range of lagging PF. Hence, the proposed VSVM achieves full operation range of lagging PF. Besides, an active neutral point voltage control (NPVC) strategy is also proposed. Only one coefficient needs to be calculated, so the calculation is simple. In addition, it considers both the NPV fluctuation and the NP current introduced by the selected virtual small vector, and it can provide zero, positive, and negative NP current. Hence, it is accurate to control the NPV, and it could balance the NPV without obvious dc offset and ac ripples under all PF conditions and modulation indexes. The proposed modulation and control strategies are verified by experiment results with a 3 kVA prototype.
S

SunView 深度解读

该八开关三电平拓扑及虚拟矢量调制技术对阳光电源SG系列光伏逆变器和ST储能变流器具有重要应用价值。相比传统十二开关方案,可降低33%功率器件成本,契合分布式光伏降本需求。所提全滞后无功调节能力可增强电网支撑功能,满足新版并网标准对无功补偿的要求。主动中点电压控制策略计算简便、精度高,可直接应用于SG系列三电平逆变器的DSP控制算法优化,降低电容电压波动,提升系统可靠性。该技术与阳光现有SVPWM控制平台兼容性好,可快速导入3-10kW户用及工商业逆变器产品线,在保证性能前提下实现显著成本优势。