← 返回
基于参数设计方法的电容式电能传输系统效率优化
Efficiency Optimization Based Parameter Design Method for the Capacitive Power Transfer System
| 作者 | Yu Wu · Qianhong Chen · Xiaoyong Ren · Zhiliang Zhang |
| 期刊 | IEEE Transactions on Power Electronics |
| 出版日期 | 2021年8月 |
| 技术分类 | 拓扑与电路 |
| 技术标签 | DC-DC变换器 充电桩 |
| 相关度评分 | ★★★ 3.0 / 5.0 |
| 关键词 | 电容式电能传输 CPT DC-DC效率 参数设计 T型模型 阻抗分析 电容耦合器 |
语言:
中文摘要
本文提出了一种旨在提升电容式电能传输(CPT)系统DC-DC效率的参数设计方法。通过类比电感式电能传输(IPT)系统,利用T型模型分析电容耦合器,直观地揭示了二次侧的阻抗反射特性,为优化系统参数提供了理论依据。
English Abstract
In this article, a parameter design method is proposed to improve the dc-dc efficiency of the capacitive power transfer (CPT) system. Similar to the inductive power transfer (IPT) system, the capacitive coupler is analyzed by using a T-type model, giving direct insight into the impedance refracted from the secondary side. Compared to the IPT system, the external capacitor of the capacitive coupler...
S
SunView 深度解读
电容式电能传输(CPT)技术作为一种非接触式能量传输方案,在电动汽车无线充电领域具有潜在应用前景。虽然阳光电源目前主营业务集中在有线充电桩,但该研究中关于T型模型分析及阻抗匹配的参数优化方法,对提升高频DC-DC变换器的功率密度和转换效率具有参考价值。建议研发团队关注该技术在未来高功率密度充电模块及特殊场景下非接触式补能方案的演进,以保持技术储备的领先性。