← 返回
多并联模块化并网逆变器系统防止共模与交互不稳定性的通用设计程序
A General Design Procedure for Multi-Parallel Modular Grid-Tied Inverters System to Prevent Common and Interactive Instability
| 作者 | Tong Chen · Chi-Kwan Lee · S.Y. Ron Hui |
| 期刊 | IEEE Transactions on Power Electronics |
| 出版日期 | 2019年7月 |
| 技术分类 | 系统并网技术 |
| 技术标签 | 光伏逆变器 并网逆变器 弱电网并网 跟网型GFL |
| 相关度评分 | ★★★★★ 5.0 / 5.0 |
| 关键词 | 多并联逆变器 并网逆变器 交互不稳定性 电网阻抗 耦合效应 系统稳定性 模块化设计 |
语言:
中文摘要
本文基于等效电路模型,分析了多并联模块化并网逆变器之间的相互作用及其与电网阻抗的耦合效应。研究表明,即使使用完全相同的逆变器,系统中仍可能发生交互不稳定性。通过系统化的控制与电路参数设计,可有效提升系统的稳定性。
English Abstract
Based on the equivalent circuit model, the interactions of multi-parallel modular grid-tied inverters and their coupling effect with grid impedance are analyzed in this letter. The analysis shows that interactive instability could happen in the inverter system even when identical inverters have been used. However, if the control and circuit parameters are designed systematically, the system can be...
S
SunView 深度解读
该研究直接关联阳光电源组串式及集中式光伏逆变器在大型地面电站及工商业场景下的多机并联应用。随着电站规模扩大,逆变器间的谐振与交互稳定性成为并网关键挑战。该通用设计程序可指导阳光电源研发团队在多机并联控制策略中优化阻抗匹配,提升在弱电网环境下的系统鲁棒性,减少因交互作用导致的脱网风险。建议将该设计准则集成至iSolarCloud智能运维平台的仿真模型中,用于指导现场电站的参数整定与故障预防。