← 返回
基于矩阵变换器的开绕组驱动及其共模电压消除:拓扑、分析与比较
Matrix Converter Based Open-End Winding Drives With Common-Mode Elimination: Topologies, Analysis, and Comparison
| 作者 | Saurabh Tewari · Ned Mohan |
| 期刊 | IEEE Transactions on Power Electronics |
| 出版日期 | 2018年10月 |
| 技术分类 | 拓扑与电路 |
| 技术标签 | 三相逆变器 空间矢量调制SVPWM 功率模块 |
| 相关度评分 | ★★ 2.0 / 5.0 |
| 关键词 | 矩阵变换器 开绕组电机驱动 共模电压 旋转矢量 功率密度 可靠性 输入功率因数 |
语言:
中文摘要
本文研究了基于矩阵变换器的开绕组电机驱动系统。通过旋转矢量调制技术,该拓扑消除了导致电机故障的高频共模电压。相比背靠背变换器,该方案无需中间直流母线电容,提升了功率密度与可靠性,并具备高电压传输比及输入功率因数控制能力。
English Abstract
Matrix converter based open-end winding drives modulated with rotating vectors eliminate the high-frequency common-mode output voltage that could otherwise cause motor failure. Unlike back-to-back converters, no intermediate dc bus capacitor is required-better power density and reliability may, therefore, be achievable. A high voltage transfer ratio and input power factor control capability put th...
S
SunView 深度解读
该文献探讨的矩阵变换器与无直流母线电容技术,在提升功率密度和可靠性方面具有前瞻性。虽然阳光电源目前的主流光伏逆变器和储能PCS(如PowerTitan系列)多采用成熟的电压源型逆变器架构,但该技术对于未来探索高功率密度、长寿命的电力电子变换器具有参考价值。建议研发团队关注其在减少电容失效风险方面的研究,评估其在特定工业驱动或未来紧凑型储能变流器中的应用潜力,以优化系统体积与可靠性指标。