← 返回
拓扑与电路 充电桩 有限元仿真 多物理场耦合 ★ 3.0

一种利用集总回路模型优化感应电能传输线圈效率与杂散磁场的快速方法

A Fast Method to Optimize Efficiency and Stray Magnetic Field for Inductive-Power-Transfer Coils Using Lumped-Loops Model

作者 Ming Lu · Khai D. T. Ngo
期刊 IEEE Transactions on Power Electronics
出版日期 2018年4月
技术分类 拓扑与电路
技术标签 充电桩 有限元仿真 多物理场耦合
相关度评分 ★★★ 3.0 / 5.0
关键词 感应电能传输 效率 漏磁场 帕累托前沿 集总回路模型 线圈设计 有限元仿真
语言:

中文摘要

感应电能传输(IPT)中线圈的设计直接影响系统效率与杂散磁场。传统的帕累托前沿优化方法依赖大量三维有限元仿真,耗时巨大。本文提出一种基于集总回路模型的快速优化方法,在保证精度的前提下大幅提升了线圈参数扫描与多目标优化效率。

English Abstract

Both the efficiency and stray magnetic field in inductive power transfer are influenced by the design of transmitter and receiver coils. Their synergetic optimization is realized with Pareto front. The conventional method to derive the front requires thousands of finite-element simulations to sweep the physical parameters of the coils, which is time consuming especially for three-dimensional simul...
S

SunView 深度解读

该研究提出的快速优化算法对阳光电源的电动汽车充电桩业务具有参考价值。在无线充电技术(IPT)的研发中,线圈的电磁兼容性(EMC)与传输效率是核心难点。通过集总回路模型替代繁琐的有限元仿真,研发团队可显著缩短无线充电模块的迭代周期,降低杂散磁场设计难度。建议将此方法集成至iSolarCloud的仿真辅助工具链中,以优化充电桩产品的电磁设计,提升系统功率密度与安全性。