← 返回
一种用于开关磁阻电机驱动的非对称三电平中点钳位变换器
An Asymmetric Three-Level Neutral Point Diode Clamped Converter for Switched Reluctance Motor Drives
| 作者 | Fei Peng · Jin Ye · Ali Emadi |
| 期刊 | IEEE Transactions on Power Electronics |
| 出版日期 | 2017年11月 |
| 技术分类 | 拓扑与电路 |
| 技术标签 | 三电平 功率模块 |
| 相关度评分 | ★★ 2.0 / 5.0 |
| 关键词 | 非对称三电平变换器 中点钳位型 开关磁阻电机 直流母线电压平衡 电流控制 电力电子 |
语言:
中文摘要
本文提出了一种用于开关磁阻电机驱动的非对称三电平中点钳位变换器。文中详细介绍了该变换器的调制方法、直流侧电压平衡算法及电流控制方案,并从成本和电流纹波等方面将其与传统的两电平非对称半桥变换器进行了对比分析。
English Abstract
An asymmetric three-level neutral point diode clamped converter for switched reluctance motor drives is proposed in this paper. The modulation method, the dc-link voltage balancing algorithm, and the current control scheme of this converter are presented. The proposed three-level converter is compared with the conventional two-level asymmetric half-bridge converter in terms of cost, current ripple...
S
SunView 深度解读
该文献探讨的三电平中点钳位(NPC)拓扑在电力电子领域具有通用性。虽然阳光电源目前的核心业务聚焦于光伏逆变器、储能变流器(PCS)及风电变流器,而非开关磁阻电机驱动,但其提出的三电平调制策略、中点电压平衡控制算法对于阳光电源的组串式逆变器和PowerTitan系列储能变流器的拓扑优化具有参考价值。建议研发团队关注其直流侧电压平衡算法,以提升高压储能系统在复杂工况下的输出电能质量与器件可靠性。