← 返回

一种用于非冗余电压源逆变器驱动感应电机的嵌入式闭环容错控制方案

An Embedded Closed-Loop Fault-Tolerant Control Scheme for Nonredundant VSI-Fed Induction Motor Drives

作者 Dehong Zhou · Yunhua Li · Jin Zhao · Feng Wu · Hui Luo
期刊 IEEE Transactions on Power Electronics
出版日期 2017年5月
技术分类 控制与算法
技术标签 三相逆变器 故障诊断 PWM控制 可靠性分析
相关度评分 ★★★ 3.0 / 5.0
关键词 非冗余电压源逆变器 容错控制 感应电机驱动 逆变器桥臂故障 闭环控制 重构
语言:

中文摘要

非冗余电压源逆变器通过极少的附加组件实现重构与运行,是解决逆变器桥臂故障的有效方案。然而,现有控制方案通常将故障前与故障后状态分开设计,导致控制切换不平滑。本文提出一种嵌入式闭环容错控制方案,实现了从正常运行到故障容错模式的平滑过渡。

English Abstract

The nonredundant voltage-source inverter, which exploits the possibility of minimum additional components for reconfiguration and operation, is a promising solution to manage faults in one inverter leg. However, control schemes at prefault and postfault conditions are always designed, separately making it hard for control scheme adaptation from normal to fault tolerant. In order to achieve smooth ...
S

SunView 深度解读

该研究关注逆变器桥臂故障后的容错控制策略,对于提升阳光电源组串式逆变器及风电变流器的可靠性具有参考价值。虽然文章针对的是电机驱动场景,但其提出的“故障前到故障后平滑切换”的控制逻辑,可借鉴应用于光伏逆变器或储能变流器(PCS)的功率模块故障保护中。通过嵌入式闭环控制优化,可减少硬件冗余需求,降低产品成本,同时提升设备在极端工况下的运行稳定性,对保障电站运维效率和降低故障停机时间具有积极意义。