← 返回
基于增强型电流镜缓冲器的自适应偏置低压差线性稳压器设计与分析
Design and Analysis of an Adaptively Biased Low-Dropout Regulator Using Enhanced Current Mirror Buffer
| 作者 | Ashis Maity · Amit Patra |
| 期刊 | IEEE Transactions on Power Electronics |
| 出版日期 | 2016年3月 |
| 技术分类 | 拓扑与电路 |
| 技术标签 | 功率模块 储能变流器PCS 光伏逆变器 |
| 相关度评分 | ★★★ 3.0 / 5.0 |
| 关键词 | 低压差线性稳压器(LDO) 自适应偏置 增强型电流镜缓冲器 PMOS功率晶体管 输出阻抗 瞬态响应 稳定性 |
语言:
中文摘要
本文提出了一种采用增强型电流镜(ECM)缓冲器的自适应偏置低压差线性稳压器(LDO),用于驱动PMOS功率管栅极。该ECM缓冲器具有极低的输出阻抗,能有效推高PMOS栅极极点以提升稳定性,并提供对称的充放电转换速率,从而显著改善瞬态响应性能。
English Abstract
This paper presents an adaptively biased low-dropout regulator using an enhanced current mirror (ECM) buffer for effectively driving the gate of the PMOS power transistor. The proposed ECM buffer offers very low output impedance, which pushes out the pole at the gate of the PMOS power transistor to improve the stability. At the same time, it offers a symmetric pull-up/down slew rate to enhance the...
S
SunView 深度解读
该研究聚焦于高性能LDO设计,LDO作为功率电子设备内部控制电路的核心电源模块,对系统的稳定性与瞬态响应至关重要。对于阳光电源的组串式逆变器、PowerTitan/Stack储能系统以及充电桩产品,内部控制板卡(如DSP、FPGA供电)对电源纹波和负载瞬态响应有极高要求。该ECM缓冲器技术可优化控制芯片的供电质量,提升系统在复杂电网环境下的抗干扰能力。建议研发团队在后续高功率密度控制板卡设计中,评估该拓扑在提升控制系统可靠性方面的应用价值。