← 返回
关于利用最优电压平衡方法降低堆叠多单元变换器功率损耗的研究
On Reducing Power Losses in Stack Multicell Converters with Optimal Voltage Balancing Method
| 作者 | Amer M. Y. M. Ghias · Josep Pou · Vassilios G. Agelidis |
| 期刊 | IEEE Transactions on Power Electronics |
| 出版日期 | 2015年9月 |
| 技术分类 | 拓扑与电路 |
| 技术标签 | 多电平 PWM控制 储能变流器PCS 功率模块 |
| 相关度评分 | ★★★★ 4.0 / 5.0 |
| 关键词 | 堆叠多电平变换器 电压平衡 PD-PWM 功率损耗降低 开关转换 代价函数 |
语言:
中文摘要
本文提出了一种基于相移脉宽调制(PD-PWM)的堆叠多单元变换器(SMC)电压平衡方法。为减少功率器件的开关转换次数,该方法仅在相邻电压电平间执行最优转换,并通过代价函数评估选择最优转换序列,从而显著降低了开关损耗。
English Abstract
This paper proposes a voltage balancing method for stacked multicell converters (SMCs) based on phase-disposition pulse-width modulation (PD-PWM). In order to reduce the switching transitions of the power devices, only optimal transitions between consecutive voltage levels are used. Selection of the optimal transition sequence is performed by evaluating a cost function. Significant reductions in t...
S
SunView 深度解读
该研究提出的多电平拓扑控制技术对阳光电源的储能变流器(如PowerTitan系列)及大功率集中式光伏逆变器具有重要参考价值。通过优化电压平衡与开关策略,可有效降低高压大功率变换器的开关损耗,提升系统整体效率。建议研发团队关注该代价函数优化算法,将其应用于多电平PCS的调制策略中,以提升产品在轻载及高频工况下的能效表现,同时优化散热设计,进一步提升功率密度。