← 返回
一种用于燃料电池UPS的集成PFC和DC-DC功能的前端变换器
Front-End Converter With Integrated PFC and DC–DC Functions for a Fuel Cell UPS With DSP-Based Control
| 作者 | Renato Santiago Maciel · Luiz Carlos de Freitas · Ernane Antonio Alves Coelho · Joao Batista Vieira · Luiz Carlos Gomes de Freitas |
| 期刊 | IEEE Transactions on Power Electronics |
| 出版日期 | 2015年8月 |
| 技术分类 | 氢能与燃料电池 |
| 技术标签 | DC-DC变换器 PFC整流 PWM控制 储能系统 |
| 相关度评分 | ★★★ 3.0 / 5.0 |
| 关键词 | 前端变换器 PFC DC-DC PEMFC UPS 软换流 Boost变换器 |
语言:
中文摘要
本文提出了一种用于质子交换膜燃料电池(PEMFC)不间断电源(UPS)的集成PFC和DC-DC功能的Boost变换器。通过引入无源谐振软开关单元,在提升效率、降低电磁干扰的同时,实现了自然受控的超前/滞后特性。
English Abstract
This paper presents the development of a boost converter with integrated power factor correction (PFC) and dc-dc functions for a proton exchange membrane fuel cell (PEMFC) uninterruptable power supply (UPS). Through the use of a passive resonant soft-commutation cell, which besides providing improvements in efficiency and reduced electromagnetic interference, produces a naturally controlled superc...
S
SunView 深度解读
该研究涉及燃料电池与电力电子变换器的集成,与阳光电源氢能业务(电解槽电源)及储能系统(UPS/备用电源)技术路径相关。文中提出的软开关技术和集成化拓扑有助于提升功率密度和转换效率。建议研发团队关注该拓扑在氢能制氢电源及高可靠性储能PCS中的应用潜力,特别是在降低开关损耗和电磁干扰方面的设计经验,可为公司下一代高功率密度氢能电源模块的开发提供参考。