← 返回
拓扑与电路 PFC整流 三相逆变器 储能变流器PCS ★ 3.0

基于混合电容的脉冲功率负载准单级三相AC/DC变换器

Hybrid-Capacitor-Based Quasi-Single-Stage Three-Phase AC/DC Converter for Pulsed Power Load

作者 Yubin Duan · Hongfei Wu · Jiajie Huang · Xin Jin · Huimin Yin · Yan Xing
期刊 IEEE Transactions on Power Electronics
出版日期 2026年2月
技术分类 拓扑与电路
技术标签 PFC整流 三相逆变器 储能变流器PCS
相关度评分 ★★★ 3.0 / 5.0
关键词 准单级式 三相AC-DC变换器 混合电容 脉冲功率负载 功率解耦 电压稳定
语言:

中文摘要

本文提出了一种用于脉冲功率负载的准单级三相AC/DC变换器,采用无源/有源混合电容(PAHC)技术。PAHC不仅能提供脉冲解耦功率,还能通过输出电压的互补特性稳定负载电压。该架构通过双输出设计,有效提升了脉冲负载下的系统性能与功率密度。

English Abstract

A quasi-single-stage three-phase ac–dc converter with a passive/active-hybrid capacitor (PAHC) is proposed for pulsed power load applications. The PAHC not only provides pulsed decoupling power but also stabilizes the load voltage by leveraging the complementary characteristics of its output voltages. Meanwhile, the architecture of the three-phase dual output ac–dc converter supplying power to the...
S

SunView 深度解读

该技术主要针对高脉冲负载场景,虽然阳光电源目前的组串式逆变器和PowerTitan储能系统主要面向电网侧或工商业平稳负载,但该混合电容(PAHC)解耦技术在提升功率密度和应对瞬态冲击方面具有参考价值。对于未来的特种电源或高频脉冲储能应用(如工业微网中的瞬态补偿),该拓扑可优化PCS的直流母线设计,减少电容体积,从而提升设备功率密度。建议研发团队关注其在抑制直流侧纹波及提升系统动态响应方面的应用潜力。