一种用于直接下垂控制的构网型逆变器的两阶段限流控制策略

This paper presents a two-stage current limiting control strategy with fault ride-through capability for direct-droop-controlled grid-forming (GFM) inverters. The proposed two-stage approach comprises two current limiting controls in Stages 1 and 2. During faults, the Stage 1 current limiting control instantly clamps the inverter output current magnitude to its maximum transient limit by blocking the switching pulses to the insulated-gate bipolar transistors (IGBTs) with the help of a hysteresis loop control. The Stage 2 current limiting control limits the inverter output current magnitude to its steady-state limit by regulating the amplitude and angular frequency of the modulating waveform utilizing the active and reactive current limiting control loops. By implementing the current limiting actions in two stages, this approach can effectively limit the over-current within a few PWM cycles after the fault occurrence and ensure synchronism to the grid after long-term fault events. The efficacy of the proposed control approach is validated through results obtained from electromagnetic transient (EMT) simulation conducted on a single GFM inverter-based test system and the IEEE 39-bus test system with multiple GFM inverters in the PSCAD platform.