← 返回
通过在ZVS运行下最小化电压-电流重叠来降低DAB变换器的关断损耗
Reducing Turn-OFF Losses in DAB Converters by Minimizing Voltage–Current Overlap Under ZVS Operation
| 作者 | Zhixuan Wang · Xiangdong Sun · Weizhang Song · Patrick Wheeler · Biying Ren · Shenrui Liu |
| 期刊 | IEEE Transactions on Power Electronics |
| 出版日期 | 2025年11月 |
| 技术分类 | 拓扑与电路 |
| 技术标签 | DAB 储能变流器PCS 双向DC-DC 功率模块 |
| 相关度评分 | ★★★★★ 5.0 / 5.0 |
| 关键词 | DAB变换器 ZVS 关断损耗 MVCO-TPS调制 开关损耗 电力电子 效率提升 |
语言:
中文摘要
随着功率变换器开关频率的提高,开关损耗成为提升效率的主要障碍。在零电压开关(ZVS)条件下,关断损耗是损耗的主要来源。本文提出了一种用于双有源桥(DAB)变换器的最小化电压-电流重叠三移相(MVCO-TPS)调制策略,旨在优化开关过程,降低关断损耗。
English Abstract
With the increasing switching frequencies in power converters, switching losses have become a primary obstacle to further efficiency enhancement. Under zero-voltage switching (ZVS) conditions, turn-off loss is the primary source of loss. In this article, a minimizing voltage–current overlap triple-phase-shift (MVCO-TPS) modulation for dual-active-bridge converter is proposed. Considering that the ...
S
SunView 深度解读
该技术对阳光电源的储能业务(如PowerTitan、PowerStack及ST系列PCS)具有极高的应用价值。DAB变换器是双向储能变流器的核心拓扑,该研究提出的MVCO-TPS调制策略能有效降低高频下的关断损耗,从而提升PCS的整机效率和功率密度。建议研发团队在下一代高频化储能变流器设计中引入该调制算法,特别是在采用SiC等宽禁带半导体器件的模块中,以进一步优化热管理并提升系统在全负载范围内的转换效率。