← 返回
基于耦合电感的双极性直流微电网自平衡Buck型变换器
Coupled-Inductor-Based Buck-Type Converter With Autonomous Voltage Balancing for Bipolar DC Microgrid
| 作者 | Guangfu Ning · Jiayu Chen · Yonglu Liu · Guo Xu · Wenjing Xiong · Mei Su |
| 期刊 | IEEE Transactions on Power Electronics |
| 出版日期 | 2024年10月 |
| 技术分类 | 拓扑与电路 |
| 技术标签 | DC-DC变换器 微电网 储能变流器PCS |
| 相关度评分 | ★★★★ 4.0 / 5.0 |
| 关键词 | 双极性直流微电网 Buck变换器 耦合电感 电压平衡 不平衡负载 DC-DC变换器 |
语言:
中文摘要
针对双极性直流微电网在不平衡负载下的电压稳定性问题,本文提出了一种新型双极性输出Buck变换器。该拓扑在输入侧仅使用一个开关电路,输出侧采用两个二极管整流器和两个LC滤波器,并通过耦合电感替代独立电感,实现了双极性输出电压的自动平衡与稳定。
English Abstract
To maintain the stability and balance of the output voltage of the bipolar system under unbalanced loads, this letter proposes a novel buck converter with bipolar outputs, where only one “switch circuit” is on the input side while two diode rectifiers and two LC filters are on the output side. Instead of two independent filter inductors, one coupled inductor is adopted. As a result, the bipolar ou...
S
SunView 深度解读
该技术对于阳光电源的储能系统(如PowerStack、PowerTitan)及微电网解决方案具有重要参考价值。在双极性直流配电或储能直流侧应用中,该拓扑通过耦合电感实现电压自平衡,能有效简化控制策略并降低硬件成本。建议研发团队关注其在直流微电网接口变换器中的应用潜力,特别是针对工商业储能系统中多端口直流变换器的优化设计,以提升系统在不平衡负载工况下的鲁棒性与效率。