← 返回
控制与算法 故障诊断 可靠性分析 ★ 3.0

基于位置信号与非导通相电流的双凸极电磁电机位置传感器故障诊断方法

Position Signal and Nonconduction Phase Current Based Fault Diagnosis Method of Position Sensor for Doubly Salient Electromagnetic Motor

作者 Yijun Zhang · Bo Zhou · Wenjing Fang · Yi Lu · Siyuan Jiang
期刊 IEEE Transactions on Power Electronics
出版日期 2024年7月
技术分类 控制与算法
技术标签 故障诊断 可靠性分析
相关度评分 ★★★ 3.0 / 5.0
关键词 双凸极电磁电机 位置传感器 故障诊断 换相控制 转子位置 电机驱动系统
语言:

中文摘要

可靠的转子位置信息对电机驱动系统的换相控制至关重要。霍尔传感器常用于获取位置信息,但其故障会导致换相逻辑混乱,降低电机输出转矩甚至导致系统失效。本文提出了一种基于位置信号与非导通相电流的故障诊断方法,旨在提升电机驱动系统的运行可靠性。

English Abstract

Reliable rotor position information is essential for accurate commutation control of motor drive system. Traditionally, hall sensors have been widely used to obtain rotor position information. The fault of position sensor will lead to the confusion of the commutation logic, which will reduce the output torque of the motor and even fail to operate normally. Therefore, fault diagnosis of position se...
S

SunView 深度解读

该文献提出的电机位置传感器故障诊断技术,对于提升电机驱动系统的可靠性具有参考价值。虽然阳光电源目前核心业务聚焦于光伏逆变器、储能PCS及风电变流器,但在风电变流器(发电机侧控制)及未来可能涉及的工业电机驱动领域,传感器故障诊断是提升系统可用性的关键。建议研发团队关注该类基于非导通相电流的无传感器或冗余诊断算法,以增强阳光电源在严苛工况下(如海上风电)变流器控制系统的鲁棒性,减少因传感器故障导致的停机风险。