← 返回

无需偏导数的谐振电流控制器无源性设计

Passivity-Based Design of Resonant Current Controllers Without Involving Partial Derivative

语言:

中文摘要

针对数字控制延迟问题,本文提出了一种电流控制器耗散性设计方法,以增强跟网型变换器与电网间的交互稳定性。核心原理是在奈奎斯特频率以下使变换器输出导纳实部保持非负。除基波电流控制外,通过引入相位超前补偿,实现了系统的无源性设计,有效提升了弱电网下的并网稳定性。

English Abstract

In terms of digital control delay, dissipation of the current controller is necessary to enhance the interactive stability between grid-following converters and the grid. The key principle is to make the real part of the converter output admittance non-negative below Nyquist frequency. Besides the fundamental current control, a phase-lead compensation should be introduced for the dissipative desig...
S

SunView 深度解读

该研究直接服务于阳光电源的核心业务——光伏逆变器与储能变流器(PCS)。随着全球电网弱化,跟网型(GFL)变换器在弱电网下的谐振与失稳风险增加。本文提出的无源性设计方法,无需复杂的偏导数计算,易于在阳光电源的组串式逆变器(如SG系列)及大型储能变流器(如PowerTitan系列)的数字控制算法中工程化落地。通过优化相位超前补偿策略,可显著提升产品在复杂电网环境下的鲁棒性,减少现场谐振故障,增强iSolarCloud平台对电网交互特性的监测与优化能力。