← 返回
电压调节同步Buck变换器的限流次优滑模控制
Current-Limited Suboptimal Sliding Mode Control for Voltage-Regulated Synchronous Buck Converters
| 作者 | Rafael Ramos · Victor Repecho · Domingo Biel |
| 期刊 | IEEE Transactions on Power Electronics |
| 出版日期 | 2022年11月 |
| 技术分类 | 拓扑与电路 |
| 技术标签 | DC-DC变换器 PWM控制 |
| 相关度评分 | ★★★★ 4.0 / 5.0 |
| 关键词 | 滑模控制 同步Buck变换器 限流 开关面 非线性控制 启动响应 |
语言:
中文摘要
本文提出了一种基于非线性切换面的新型滑模控制策略,旨在实现降压变换器在启动过程中的次优限流响应。该设计通过结合不同的切换面,使系统轨迹在输出电压误差较小前沿恒流路径运行,并引入非奇异终端滑模控制,优化了动态性能与限流保护。
English Abstract
This article proposes a new sliding mode control based on a nonlinear switching surface that provides a suboptimal current-limited start-up response in step-down converters. The main idea behind the design consists in combining different switching surfaces. The first one forces the system trajectories to track a constant current path until the output voltage error is small. A nonsingular terminal ...
S
SunView 深度解读
该研究提出的限流滑模控制技术对于阳光电源的DC-DC变换环节具有重要参考价值。在户用及工商业光伏逆变器、储能系统(如PowerStack/PowerTitan中的DC-DC模块)以及电动汽车充电桩中,启动阶段的电流冲击保护至关重要。采用该非线性滑模控制策略,可以在保证系统动态响应速度的同时,有效限制启动电流,提升功率模块的可靠性与安全性,减少对功率器件的应力冲击,有助于优化产品在复杂负载下的启动性能。