← 返回
采用三次谐波注入的电流源逆变器供电五相感应电机控制策略
Control Strategy of a Five-Phase Induction Machine Supplied by the Current Source Inverter With the Third Harmonic Injection
| 作者 | Marcin Morawiec · Filip Wilczynski |
| 期刊 | IEEE Transactions on Power Electronics |
| 出版日期 | 2022年8月 |
| 技术分类 | 拓扑与电路 |
| 技术标签 | PWM控制 多电平 功率模块 |
| 相关度评分 | ★★ 2.0 / 5.0 |
| 关键词 | 五相感应电机 电流源逆变器 三次谐波注入 电力驱动系统 控制策略 |
语言:
中文摘要
本文研究了由电流源逆变器(CSI)驱动的五相感应电机系统。相比传统三相电机,五相电机能更有效地利用电磁电路。文章提出了一种结合三次谐波注入的控制策略,旨在优化电流源逆变器供电下的电机驱动性能,提升系统的运行效率与控制精度。
English Abstract
In the five-phase induction machine (IM), it is possible to better use the electromagnetic circuit than in the three-phase IM. This requires the use of an adequate converter system which will be supplied by an induction machine. The electric drive system described, in this article, includes the five-phase induction machine supplied by the current source inverter (CSI). The proposed novelty—not pre...
S
SunView 深度解读
该研究聚焦于多相电机驱动与电流源逆变器拓扑,与阳光电源现有的光伏逆变器(电压源型)及储能变流器(PCS)主流技术路线存在差异。虽然五相电机技术在工业驱动领域具有高可靠性和容错性优势,但目前阳光电源的核心业务(光伏、储能、风电)主要基于三相电压源逆变器架构。建议关注其三次谐波注入及多相控制算法,这些控制思想在未来超大功率风电变流器或特殊工业驱动场景中可能具备技术储备价值,但短期内对现有产品线直接应用有限。