← 返回
重新思考电感寄生电容建模的基本假设
Rethinking Basic Assumptions for Modeling Parasitic Capacitance in Inductors
| 作者 | Hongbo Zhao · Shaokang Luan · Zhan Shen · Alex J. Hanson · Yuan Gao · Dipen Narendra Dalal · Rui Wang · Shuhan Zhou · Stig Munk-Nielsen |
| 期刊 | IEEE Transactions on Power Electronics |
| 出版日期 | 2022年7月 |
| 技术分类 | 拓扑与电路 |
| 技术标签 | 光伏逆变器 储能变流器PCS 功率模块 有限元仿真 |
| 相关度评分 | ★★★★ 4.0 / 5.0 |
| 关键词 | 寄生电容 电感器 集总电容网络 能量守恒法 高频建模 电力电子 |
语言:
中文摘要
本文重新审视了电感寄生电容解析建模中的常用假设,重点分析了集总电容网络法和能量守恒法。研究指出集总电容网络法在计算等效寄生电容时存在局限性,并对相关物理建模方法进行了修正与优化,旨在提升高频功率变换器中电感设计的准确性。
English Abstract
This article rethinks the basic assumptions often used in analytically modeling parasitic capacitance in inductors. These assumptions are classified in two commonly-used physics-based analysis methods: the lumped capacitor network method and the energy conservation method. The lumped-capacitor network method is not the proper solution for calculating the equivalent parasitic capacitance in inducto...
S
SunView 深度解读
电感是阳光电源光伏逆变器(如组串式、集中式)及储能系统(如PowerTitan、ST系列PCS)的核心磁性元件。随着功率密度提升和开关频率增加,寄生电容对EMI性能及高频损耗的影响愈发显著。本文提出的建模优化方法有助于研发团队在设计阶段更精确地预测磁性元件的高频行为,减少样机调试迭代次数。建议在iSolarCloud智能运维平台中结合此类高精度建模数据,优化变流器在复杂工况下的热管理与效率评估,提升产品可靠性。