← 返回
基于晶闸管的模块化多电平直流链路T型变换器
Thyristor-Based T-Type Converter With Modular Multilevel DC-Link
| 作者 | Decun Niu · Feng Gao · Tao Xu · Zhan Ma |
| 期刊 | IEEE Transactions on Power Electronics |
| 出版日期 | 2022年6月 |
| 技术分类 | 拓扑与电路 |
| 技术标签 | 多电平 三相逆变器 功率模块 并网逆变器 |
| 相关度评分 | ★★★ 3.0 / 5.0 |
| 关键词 | 晶闸管 T型变换器 模块化多电平 直流母线 相换流 电力电子 多电平开关 |
语言:
中文摘要
本文提出了一种基于晶闸管的模块化多电平直流链路T型变换器(TTC-MMD)。该拓扑利用晶闸管T型变换器实现基本的相换流功能,并通过直流链路中级联的子模块产生多电平开关线电压。为确保晶闸管的可靠开关,引入了全桥子模块(FBSM)以辅助换流。
English Abstract
This article proposes a thyristor-based T-type converter with modular multilevel dc-link (TTC-MMD), where the thyristor-based T-type converter provides the basic phase commutation capability and two arms of cascaded submodules in dc-link generate the multilevel switching line voltages. To guarantee the successful turn-on and turn-off of thyristors, one full-bridge submodule (FBSM) is embedded in e...
S
SunView 深度解读
该拓扑通过晶闸管与模块化多电平技术的结合,旨在提升高压大功率场景下的变换效率与电能质量。对于阳光电源而言,该技术主要关联集中式光伏逆变器及大型储能PCS产品线。虽然晶闸管在当前主流IGBT/SiC方案中应用较少,但其在高压直流侧的模块化设计思路对未来兆瓦级以上、超高压并网的PowerTitan系列储能系统或大型集中式逆变器具有潜在的参考价值,特别是在降低开关损耗和提升系统电压等级方面。建议关注其在复杂电网环境下的动态响应特性及控制复杂度。