← 返回
非正弦多相驱动系统的最小转矩脉动容错控制
Fault-Tolerant Control for Nonsinusoidal Multiphase Drives With Minimum Torque Ripple
| 作者 | Duc Tan Vu · Ngac Ky Nguyen · Eric Semail |
| 期刊 | IEEE Transactions on Power Electronics |
| 出版日期 | 2022年6月 |
| 技术分类 | 控制与算法 |
| 技术标签 | 故障诊断 功率模块 三相逆变器 |
| 相关度评分 | ★★★ 3.0 / 5.0 |
| 关键词 | 容错控制 多相驱动 非正弦电动势 转矩脉动 开相故障 矢量控制 降阶变换 |
语言:
中文摘要
针对非正弦电动势(NS-EMF)多相电机,本文提出了一种在缺相故障下保证转矩平稳的新型策略与控制方案。该方案基于降阶变换,且在故障模式下可沿用健康模式下的传统比例-积分(PI)控制器,有效简化了容错控制的实现难度。
English Abstract
For nonsinusoidal electromotive force (NS-EMF) multiphase machines, this article proposes a new strategy and control scheme to guarantee smooth torque under an open-phase fault. Notably, the conventional proportional–integral controllers implemented for vector control in healthy mode can be used in the faulty mode. The strategy is based on reduced-order transformations while the control scheme app...
S
SunView 深度解读
该研究关注多相驱动系统的容错控制,虽然阳光电源目前的核心产品(如光伏逆变器、储能PCS)多为三相系统,但其提出的“故障下维持平稳输出”及“复用健康模式控制器”的思路,对提升阳光电源大功率储能变流器(如PowerTitan系列)及风电变流器的可靠性具有参考价值。在极端工况或功率模块发生单相故障时,该算法有助于实现系统降额运行而非直接停机,从而提升电站的可用性与运维效率。建议研发团队关注该降阶变换方法在多电平拓扑故障诊断与容错控制中的应用潜力。