← 返回
高增益PWM方法及器件电压应力更低的有源开关升压Z源逆变器
High Gain PWM Method and Active Switched Boost Z-Source Inverter With Less Voltage Stress on the Devices
| 作者 | Milad Abbasi Shahabi · Mohammad Mardaneh · Eshan Jamshidpour |
| 期刊 | IEEE Transactions on Power Electronics |
| 出版日期 | 2021年1月 |
| 技术分类 | 拓扑与电路 |
| 技术标签 | 光伏逆变器 PWM控制 三相逆变器 并网逆变器 |
| 相关度评分 | ★★★★ 4.0 / 5.0 |
| 关键词 | 有源开关升压 准 Z 源逆变器 PWM 技术 高电压增益 电压应力 电力电子 电路拓扑 |
语言:
中文摘要
本文提出了一种新型高电压增益有源开关升压准Z源逆变器(qZSI)拓扑及相应的PWM控制技术。该结构具有升压能力强、元件数量少、源电流连续、器件电压应力低及共地等显著优势。
English Abstract
This article presents a new circuit topology for high voltage gain active switched boost quasi Z-source inverter (qZSI) and a pulsewidth modulation (PWM) technique. The higher boosting capability with a lower number of elements, the continuous source current, the less voltage stress across the devices, and having the common ground are the main advantages of the proposed structure. The voltage gain...
S
SunView 深度解读
该拓扑通过优化Z源网络实现了更高的电压增益和更低的器件电压应力,这对阳光电源的组串式逆变器(如SG系列)和户用光伏逆变器具有重要参考价值。在光伏组件电压波动较大或需要更高升压比的应用场景中,该技术能有效降低对功率器件耐压等级的要求,从而降低成本并提升效率。建议研发团队评估该拓扑在提升逆变器功率密度方面的潜力,并结合iSolarCloud数据分析,验证其在复杂电网环境下的可靠性与动态响应性能。