← 返回
混合三电平电流型串联谐振隔离DC-DC变换器及其优化调制策略
Hybrid-Three-Level Current-Fed Series-Resonant Isolated DC-DC Converter and its Optimization Modulation Strategy
| 作者 | Fengjiang Wu · Kaixuan Wang · Suhua Luo |
| 期刊 | IEEE Transactions on Power Electronics |
| 出版日期 | 2022年1月 |
| 技术分类 | 拓扑与电路 |
| 技术标签 | 双向DC-DC 三电平 储能变流器PCS LLC谐振 |
| 相关度评分 | ★★★★★ 5.0 / 5.0 |
| 关键词 | 混合三电平 电流型 串联谐振 双向 DC-DC 变换器 交错并联 Buck/Boost 调制策略 |
语言:
中文摘要
本文提出了一种混合三电平电流型串联谐振双向DC-DC变换器。该拓扑低压侧采用交错并联双向Buck/Boost电路,高压侧采用半桥三电平电路。文章详细分析了该变换器的工作原理与特性,并提出了占空比与谐振频率协同的优化调制策略,旨在提升变换效率与功率密度。
English Abstract
In this article, a hybrid three-level current-fed series-resonant isolated bidirectional dc–dc converter is proposed, containing an interleaved parallel bidirectional buck/boost converter at the low-voltage side and a half-bridge three-level converter at the high-voltage side. The operation principles and characteristics of the proposed converter are thoroughly analyzed with the duty-cycle plus du...
S
SunView 深度解读
该拓扑结构高度契合阳光电源储能系统(如PowerTitan、PowerStack)及PCS产品的核心需求。三电平技术能够有效降低开关损耗并减小无源元件体积,电流型谐振特性有助于实现软开关,提升变换效率。对于阳光电源而言,该技术可应用于高压储能系统中的DC-DC级,通过优化调制策略,进一步提升系统功率密度和全负载范围内的转换效率,增强在大型储能电站及工商业储能应用中的竞争力。