← 返回
控制与算法 PWM控制 三相逆变器 功率模块 ★ 4.0

针对单直流母线分流器电机驱动的时分采样误差电流重构

Current Reconstruction Considering Time-Sharing Sampling Errors for Single DC-Link Shunt Motor Drives

作者 Gaolin Wang · Feifan Chen · Nannan Zhao · Yin Bai · Binxing Li · Shaobo Liu · Dianguo Xu
期刊 IEEE Transactions on Power Electronics
出版日期 2021年5月
技术分类 控制与算法
技术标签 PWM控制 三相逆变器 功率模块
相关度评分 ★★★★ 4.0 / 5.0
关键词 单直流母线采样 电流重构 分时采样 永磁同步电机 电流校正 PWM控制
语言:

中文摘要

针对单直流母线分流器在永磁同步电机驱动中因时分采样逻辑导致的电流重构误差,本文提出了一种回溯预测电流校正方法。通过分析时分采样误差机理,该方法能有效消除重构误差,提升电机驱动系统的电流检测精度与控制性能。

English Abstract

Because of the time-sharing sampling logic, the three-phase currents reconstructed by single dc-link shunt present significant errors in the permanent magnet synchronous motor drives. A traceback-prediction current correction method for sampled currents is proposed in this article to eliminate the reconstruction errors. According to the analysis of time-sharing sampling errors, the concept of equi...
S

SunView 深度解读

该技术对于阳光电源的电机驱动类产品(如风电变流器、储能系统中的辅助电机控制或未来潜在的工业驱动业务)具有重要价值。通过单直流母线分流器进行电流重构,可以显著降低硬件成本并减小功率模块的体积。在阳光电源的组串式逆变器或储能变流器(PCS)内部,若涉及高性能电机控制(如冷却风扇驱动或特定功率器件的驱动控制),该算法能有效提升采样精度,减少对昂贵电流传感器的依赖,从而优化产品成本结构并提升系统控制的鲁棒性。