← 返回
受控谐振开关电容负载点变换器架构与建模
Regulated Resonant Switched-Capacitor Point-of-Load Converter Architecture and Modeling
| 作者 | Giacomo Ripamonti · Mario Ursino · Stefano Saggini · Stefano Michelis · Federico Faccio |
| 期刊 | IEEE Transactions on Power Electronics |
| 出版日期 | 2021年4月 |
| 技术分类 | 拓扑与电路 |
| 技术标签 | DC-DC变换器 PWM控制 |
| 相关度评分 | ★★★ 3.0 / 5.0 |
| 关键词 | 谐振开关电容 负载点变换器 电压调节 频率/移相控制 过零检测器 小信号分析 电力电子 |
语言:
中文摘要
本文提出了一种用于受控谐振开关电容负载点(PoL)变换器的新型控制系统,并对其进行了稳态和小信号分析。该系统通过片上控制器结合频率/移相调节输出电压,并利用零电流检测技术实现高效控制。该方法有效提升了电压调节性能。
English Abstract
This article presents a novel control system for a regulated resonant switched-capacitor point-of-load converter, together with its steady-state and small-signal analyses. The output voltage is regulated through a combined frequency/phase shift on-chip controller that operates, thanks to a zero-crossing detector for the tank current. By using such a control technique, voltage regulation can be ach...
S
SunView 深度解读
该文献研究的谐振开关电容变换器主要应用于高功率密度、高效率的负载点(PoL)供电场景。对于阳光电源而言,该技术可作为未来iSolarCloud智能运维平台中边缘计算模块或高密度电源模块的参考架构。虽然目前阳光电源的核心业务集中在光伏逆变器和储能系统(如PowerTitan/PowerStack),但随着系统集成度提升,对板级高效率电源转换的需求日益增长。建议研发团队关注该拓扑在提升控制精度和降低开关损耗方面的潜力,以优化未来小型化控制单元的电源设计。