← 返回
串联高压直流倍压器设计与建模
Design and Model of Series-Connected High-Voltage DC Multipliers
| 作者 | Mahran Quraan · Ahmad Zahran · Ahmed Herzallah · Ahmad Ahmad |
| 期刊 | IEEE Transactions on Power Electronics |
| 出版日期 | 2020年7月 |
| 技术分类 | 拓扑与电路 |
| 技术标签 | DC-DC变换器 多电平 |
| 相关度评分 | ★★ 2.0 / 5.0 |
| 关键词 | 高压直流发生器 Cockcroft-Walton电路 模块化拓扑 DC-DC变换 绝缘测试 串联连接 电力电子 |
语言:
中文摘要
本文提出了一种集成Cockcroft-Walton (CW)电路的模块化高压直流发生器拓扑。通过将多个CW电路串联,该方案能够有效产生高直流电压,适用于高压直流输电线绝缘测试及其他高压技术应用场景。
English Abstract
The generation of high dc voltages is necessary for feeding many technical applications and testing the insulation material of high-voltage dc transmission lines and ac power cables with long lengths. The article proposes a modular multiplier high-voltage dc generator with integrated Cockcroft-Walton (CW) circuits. In this new topology, CW circuits are connected in series to produce a high dc outp...
S
SunView 深度解读
该研究涉及的高压直流倍压技术主要应用于高压绝缘测试及实验室设备,与阳光电源现有的光伏逆变器、储能PCS及充电桩等核心产品线在拓扑结构上存在差异。虽然其模块化设计思路对提升系统电压等级具有参考价值,但由于其主要面向高压测试领域,而非电力电子变换应用,对公司现有产品线(如PowerTitan储能系统或组串式逆变器)的直接应用价值有限。建议关注其模块化串联控制策略,以探索在极端高压直流接入场景下的潜在技术储备。