← 返回
采用首个闭锁方法的MMC故障电流行为
Fault Current Behavior of MMC With the First Blocking Method
| 作者 | Xu Jiang · Mark M. Bakran |
| 期刊 | IEEE Transactions on Power Electronics |
| 出版日期 | 2019年12月 |
| 技术分类 | 拓扑与电路 |
| 技术标签 | 多电平 IGBT 功率模块 故障诊断 |
| 相关度评分 | ★★★★ 4.0 / 5.0 |
| 关键词 | MMC 全桥子模块 故障电流 IGBT 闭锁方法 混合型 MMC 电力电子 |
语言:
中文摘要
本文研究了全桥模块化多电平变换器(MMC)及混合MMC在故障下的电流行为,重点考虑了子模块中两个半桥非同步闭锁的情况。为保护全桥子模块中的IGBT,提出了一种两端不同时闭锁的保护策略,旨在优化故障期间的电流控制与器件保护。
English Abstract
This paper introduces the fault current behavior of full-bridge modular multilevel converters (MMCs) and hybrid MMCs, with a consideration of a non-simultaneous blocking of the two half-bridges in each sub-module. In order to protect insulated gate bipolar transistor (IGBTs) in the full-bridge sub-module, both sides of a full-bridge sub-module are not blocked at the same time point. It is assumed ...
S
SunView 深度解读
该研究针对MMC拓扑的故障保护机制,对阳光电源的集中式逆变器及大型储能系统(如PowerTitan系列)具有重要参考价值。随着光伏与储能系统向更高电压等级和更复杂的拓扑演进,MMC技术在大型电网侧储能和高压直流输电领域应用潜力巨大。通过优化IGBT的闭锁时序,可有效提升系统在故障工况下的可靠性,降低功率模块损坏风险,为公司开发高可靠性、高功率密度的构网型储能变流器提供理论支撑。