← 返回
一种具有更少器件数量和归一化开关/二极管峰值反向电压的改进型多端口高升压DC-DC变换器设计与分析
Design and Analysis of a Developed Multiport High Step-Up DC–DC Converter With Reduced Device Count and Normalized Peak Inverse Voltage on the Switches/Diodes
| 作者 | Kazem Varesi · Seyed Hossein Hosseini · Mehran Sabahi · Ebrahim Babaei · Saeid Saeidabadi · Naser Vosoughi |
| 期刊 | IEEE Transactions on Power Electronics |
| 出版日期 | 2019年6月 |
| 技术分类 | 拓扑与电路 |
| 技术标签 | DC-DC变换器 光伏逆变器 储能变流器PCS |
| 相关度评分 | ★★★★ 4.0 / 5.0 |
| 关键词 | 多端口变换器 高升压比 DC-DC 变换器 电压增益 电力电子 非隔离 拓扑 |
语言:
中文摘要
本文提出了一种用于高升压非隔离、非耦合电感的多端口DC-DC变换器结构。该拓扑在相同器件数量下,相比同类结构具有更高的电压增益,有效降低了开关管和二极管的电压应力,提升了功率密度和转换效率。
English Abstract
In this paper, a developed structure is proposed for high step-up nonisolated noncoupled inductor based multiport dc-dc converters. The voltage gain per number of devices of the proposed topology is higher than that of similar topologies. This means that, by using the same number of devices, the proposed topology can generate higher gains than other structures. In other words, the proposed topolog...
S
SunView 深度解读
该研究提出的高升压、低器件应力拓扑对阳光电源的组串式光伏逆变器及储能PCS产品具有重要参考价值。在光伏应用中,高升压比有助于提升MPPT效率并简化前级电路设计,特别是在低压光伏组件接入场景下能显著提升效率。在储能领域,该拓扑可优化PowerStack等储能系统的DC-DC变换级,通过减少器件数量降低成本并提升功率密度。建议研发团队评估该拓扑在宽输入电压范围下的动态响应特性,以验证其在实际工商业及户用光储一体化产品中的工程可行性。