← 返回

单元故障条件下单相有源前端级联H桥控制策略

Control Strategy of Single-Phase Active Front-End Cascaded H-Bridge Under Cell Fault Condition

作者 Yoon-Ro Lee · Jeong-Mock Yoo · Hyun-Sam Jung · Seung-Ki Sul
期刊 IEEE Transactions on Power Electronics
出版日期 2019年5月
技术分类 拓扑与电路
技术标签 多电平 PWM控制 故障诊断 并网逆变器
相关度评分 ★★★ 3.0 / 5.0
关键词 级联H桥 有源前端 单元故障 中压驱动 电力电子 控制策略 可靠性
语言:

中文摘要

级联H桥(CHB)逆变器因其模块化程度高、易于实现中压输出及故障下持续运行能力,广泛应用于中压驱动系统。本文针对CHB功率单元需隔离直流源的特性,研究了在单元故障情况下的控制策略,旨在提升系统的可靠性与运行稳定性。

English Abstract

Cascaded H-bridge (CHB) inverter is the most widely used topology for a medium-voltage drive system due to the high degree of modularity, easier implementation of medium output voltage, and the ability to continuous operation under the cell fault condition. Because each power cell of CHB should have isolated dc source, multiwinding input transformer and three-phase active front end (AFE) are gener...
S

SunView 深度解读

该文献研究的级联H桥(CHB)拓扑在兆瓦级大功率中压变流器及部分储能PCS应用中具有参考价值。阳光电源的PowerTitan等储能系统及大型光伏逆变器目前多采用组串式或集中式拓扑,虽然CHB并非当前主流,但其故障容错控制策略对提升系统可靠性具有借鉴意义。建议研发团队关注该拓扑在超高压、大容量储能变流器中的应用潜力,特别是在提升系统冗余度和故障穿越能力方面的控制算法优化,以增强产品在极端工况下的稳定性。