← 返回
一种用于三电平T型逆变器容错运行的载波PWM方法
A Carrier-Based PWM for Three-Level T-Type Inverter to Tolerate Open-Circuit Fault
| 作者 | Tzung-Lin Lee · Bing-Feng Li · Meng-Ying Yang · Yue-Ting Tsai |
| 期刊 | IEEE Transactions on Power Electronics |
| 出版日期 | 2018年10月 |
| 技术分类 | 拓扑与电路 |
| 技术标签 | 三电平 三相逆变器 故障诊断 可靠性分析 |
| 相关度评分 | ★★★★★ 5.0 / 5.0 |
| 关键词 | 三电平T型逆变器 开路故障 容错控制 基于载波的PWM 中点电压 开关故障 |
语言:
中文摘要
本文研究了三电平T型逆变器功率开关管的开路故障,提出了一种新型容错控制策略。通过检测三相电流及中点电压变化实现故障开关定位,并开发了一种基于载波的PWM调制方法,通过将三电平模式切换为两电平模式实现故障容错运行。
English Abstract
This paper investigates the open-circuit faults of switching devices in the three-level T-Type inverter and proposes a new tolerant control method. The three-phase current and variation of the neutral-point voltage are detected to determine the fault switch. A carrier-based pulse width modulation is developed to tolerate switch fault by transiting from three-level to two-level switching. This make...
S
SunView 深度解读
T型三电平拓扑是阳光电源组串式逆变器(如SG系列)及部分大功率储能变流器(PCS)的核心技术方案。该研究提出的故障诊断与容错控制策略,对于提升光伏及储能系统在极端工况下的可靠性具有重要意义。通过在故障发生时平滑切换至两电平运行,可有效避免系统停机,提升电站可用率。建议研发团队将此算法集成至iSolarCloud智能运维平台,通过在线监测与故障容错控制,实现从“被动维修”向“主动容错”的技术升级,进一步增强阳光电源产品在复杂电网环境下的竞争力。