← 返回
拓扑与电路 可靠性分析 功率模块 ★ 4.0

高频共模电感特性表征的简易测量方法

Characterization of Common Mode Chokes at High Frequencies With Simple Measurements

作者 C. Dominguez-Palacios · J. Bernal · M. M. Prats
期刊 IEEE Transactions on Power Electronics
出版日期 2018年5月
技术分类 拓扑与电路
技术标签 可靠性分析 功率模块
相关度评分 ★★★★ 4.0 / 5.0
关键词 共模电感 高频 测量技术 频谱分析仪 跟踪信号发生器 模态分析 传输系数 四端口器件
语言:

中文摘要

本文提出了一种仅需单次测量即可在高频下表征共模电感特性的技术,该测量可通过配备跟踪信号源的频谱分析仪完成。该技术基于共模电感作为四端口器件的理论模态分析,证明了通过测量传输系数即可获取电感的高频特性。

English Abstract

In this paper, we present a technique to characterize common mode chokes at high frequencies that only requires a measurement, which can be performed with a spectrum analyzer with the tracking generator. This technique is based upon a theoretical modal analysis of the common mode choke as a four-ports device. This analysis demonstrates that the transmission coefficient measured for one of the wind...
S

SunView 深度解读

共模电感是阳光电源光伏逆变器(组串式/集中式)及储能变流器(PCS)中电磁兼容(EMC)设计的核心组件。随着功率密度提升和开关频率提高,高频段的电磁干扰抑制变得尤为关键。该研究提出的简易测量法能够有效优化研发阶段的滤波器设计,缩短测试周期,提升产品EMC性能。建议研发团队将其应用于PowerTitan等大功率储能系统及高频组串式逆变器的EMI滤波器选型与验证中,以降低高频噪声对电网及通信系统的干扰,提升系统可靠性。