← 返回
针对中点钳位变换器降低共模电压的载波调制技术评估
Evaluation of Carrier-Based Modulation Techniques With Common-Mode Voltage Reduction for Neutral Point Clamped Converter
| 作者 | Meng-Jiang Tsai · Hsin-Chih Chen · Meng-Ru Tsai · Yao-Bang Wang · Po-Tai Cheng |
| 期刊 | IEEE Transactions on Power Electronics |
| 出版日期 | 2018年4月 |
| 技术分类 | 拓扑与电路 |
| 技术标签 | 三电平 PWM控制 三相逆变器 多电平 |
| 相关度评分 | ★★★★★ 5.0 / 5.0 |
| 关键词 | 共模电压 中点钳位变换器 PWM 技术 开关状态 调制技术 三相变换器 |
语言:
中文摘要
本文针对三相三线制中点钳位(NPC)变换器,分析了共模电压与开关状态的关联。研究提出了一种通过消除冗余开关状态来降低共模电压的脉宽调制(PWM)技术,并对其性能进行了详细评估。
English Abstract
Common-mode voltage output is closely associated with switching states in three-phase three-wire neutral point clamped converter. Detailed analysis shows avoiding redundant states can effectively improve the common-mode voltage, so this paper proposes a pulse width modulation (PWM) technique with zero redundant state to reduce the common-mode voltage output, and evaluates their performance with th...
S
SunView 深度解读
该研究直接关联阳光电源的核心产品线,特别是组串式和集中式光伏逆变器中广泛使用的三电平(NPC)拓扑。共模电压的抑制对于提升系统电磁兼容性(EMC)以及降低对光伏组件的漏电流至关重要,尤其在大型地面电站和工商业项目中,能有效减少绝缘失效风险。建议研发团队关注该零冗余状态PWM策略在提升逆变器效率与可靠性方面的潜力,并评估其在下一代高功率密度三电平逆变器产品中的工程应用价值。