← 返回
表贴式永磁电机驱动六步运行的变步长控制
Variable Time Step Control for Six-Step Operation in Surface-Mounted Permanent Magnet Machine Drives
| 作者 | Jaeyong Park · Sungho Jung · Jung-Ik Ha |
| 期刊 | IEEE Transactions on Power Electronics |
| 出版日期 | 2018年2月 |
| 技术分类 | 控制与算法 |
| 技术标签 | PWM控制 三相逆变器 功率模块 |
| 相关度评分 | ★★★ 3.0 / 5.0 |
| 关键词 | 六步运行 表贴式永磁电机 弱磁 变时间步长 电流振荡 逆变器输出电压 开关损耗 |
语言:
中文摘要
本文针对表贴式永磁电机在弱磁区六步运行模式下的低频电流振荡问题,提出了一种变步长控制策略。相比传统固定采样频率系统,该方法有效解决了低采样比下的控制不稳定性,在降低开关损耗的同时,充分利用了逆变器的输出电压能力。
English Abstract
The six-step operation of surface-mounted permanent magnet machine drives in a flux weakening region has many advantages compared to the pulse width modulation mode, such as the reduced switching loss and fully utilized inverter output voltage. However, if the ratio of the sampling frequency to the fundamental frequency is low in fixed sampling system, the low-frequency oscillation in the current ...
S
SunView 深度解读
该技术主要针对电机驱动控制,与阳光电源的核心业务(光伏逆变器、储能PCS)在底层功率变换控制逻辑上有共通之处。六步运行模式下的电压利用率提升和开关损耗优化,可参考应用于阳光电源的大功率组串式逆变器或风电变流器在极端工况下的效率提升。虽然该文侧重电机驱动,但其变步长控制算法对于优化逆变器在弱电网或高频切换下的动态响应具有一定的参考价值,建议研发团队关注其在减少谐波振荡方面的控制逻辑,以提升系统在复杂电网环境下的稳定性。